Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 49)

Rockwell Automation Publication 1492-UM008A-EN-P - June 2010 5-1
Chapter
5
Calibration
General Calibration Calibrating the ClearMark Printer
Note: Affects all Cards
1. To open ClearTools, Go to: Start→Programs→Rockwell Automation→
ClearTools→ClearTools
.
2. Double click on "1492-M5X5" in the variant list.
3. In the first column, 5 marker tags down, place a capital "X" as shown. ( See
Figure 5.1.) Note: It is critical to select this tag.
Figure 5.1 -
4. On the display on the top of the printer, press the [Heating 1] and
[Heating 2]
buttons so that the LED lights are off.
a. The printed card can be cleaned with water and used again.
b. The distances required for calibrating the printer are not distorted by
the heat effects.
5. Select File→Print.
3