Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 52)

5-4 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 5 Calibration
19. Place a capital "X" in the upper right corner as shown( See Figure 5.6 ).
You can leave the "X" in the first column because it will not move with
these upcoming changes.
20. Go to File→Print, and click [Print].
Figure 5.6 -
21. If the "X" is centered you are done calibrating and are ready to print. (See
section on printing).
22. If the "X" is not centered. Go to File→ Set Printer Correction. ( See
Figure 5.7).
Figure 5.7 -
19
21
25
23
24