Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 54)

5-6 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 5 Calibration
Figure 5.10 -
2. Print the test card
3. If the text is not centered, go to File→ Adjust Marker Type (See
Figure 5.11)
Adjusting Offset of Cards
Figure 5.11 -
4. If the "X" on the test card is not centered, make adjustments to the offset
values.
Note: If the "X" is centered, leave the offset values at 0.
5. To make horizontal adjustments, see Figure 5.12.
6. To make vertical adjustments, see Figure 5.13.
1
10 11
13 14
5
6