Cleaning the print head – Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual User Manual
Page 62
Advertising
7-2
Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 7 Maintenance
Figure 7.1 - Print head cleaning option
Cleaning the print head
The cleaning process cleans the print head when a printed image appears slight
blurred. Please take the following steps:
1.
Select "Cleaning type 1" and the corresponding print heads.
Figure 7.2 - Cleaning the print head
2.
Click [Execute Head-Cleaning].
3.
The cleaning process is initiated. This can take several minutes to run.
4.
After the process has been executed by ClearMark, print out a marker card
and check the printing quality. Repeat this process if necessary or run
through a head-flushing process.
Advertising