Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 68)

7-8 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 7 Maintenance
General Cleaning
Clean the outside of the printer regularly by wiping it with a soft cloth that is
either dry or moistened with water.
If the dirt does not come off, wipe the printer with a cloth moistened with a
neutral cleaning agent. Next wipe with a cloth moistened with water and then
with a dry cloth.
Transport and shipment
Preparation:
1. Turn off the printer.
2. Unplug all cables (power cord, interface cable) from the printer.
3. Remove the remaining marker cards from the loader.
4. Remove the ink waste pad and place in a sealed plastic bag. Enclose this
along with the printer.
ATTENTION: Do not use volatile chemicals such as benzene,
thinning fluid or insecticide on the printer. The use of such
chemicals can result in damage to the printer including cracks or
color changes. If you use a cloth moistened with a cleaning
agent, be careful that you only clean the outside of the device.
None of the moisture should be allowed inside of the printer.
ATTENTION: In order to avoid dangerous electric shock you
should only clean the outside of the printer. Contact your local
Allen-Bradley distributor or Rockwell Automation Technical
Support if the printer needs to be checked, adjusted or repaired.
Do not take the printer apart and do not try to conduct
modifications or repairs by yourself.
By doing so you risk fire, electric shock, explosion or personal
injury.
In addition, such actions would void the warranty.
IMPORTANT Please do not throw away the original packaging. Always use the
original packaging when transporting the printer over long distances
(for example moving or returning). Only then can the maximum
protection for the printer during transport be guaranteed.