Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual User Manual
Page 50
5-2
Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 5 Calibration
6.
In the pull down menu select the GelSprinter GX3000/3050N printer .
See Figure 5.2.
Figure 5.2 -
7.
Click [Map]. (The 1492-M5X5 is now linked to this printer)
8.
Click [OK], with the "As Printer" selected. See Figure 5.2.
9.
Click [Calibration].
10.
Verify a value of "7" in the box marked "Left" and a "66" in the box marked
"Top". See Figure 5.3.
11.
Click [Save].
Figure 5.3 -
12.
Load the 1492-M5X5 card.
13.
Click on Print. (Pop-up window appears: leave heat off and click [OK].)
14.
If the "X" is centered: proceed to step 19.
15.
If the "X" is not centered: go to File -> Print, and click [Calibration].
16.
See Figure 5.4 for horizontal adjustments.
17.
See Figure 5.5 for vertical adjustments.
Note: When making adjustments use maximum increments of 0.5 mm.
7
6
9
13
8
11
10