Rockwell Automation 1734-485ASC POINT I/O ASCII User Manual - Manual (Page 30)

Publication 1734-UM009B-EN-P - July 2003
2-4 Configuring Your ASCII Module
Adding the ASCII Modules to Your Network
Follow these steps:
1. Start the RSNetworx for DeviceNet software.
2. Add the communication device as shown below. (In this case,
the chosen device was a 1734-ADN DeviceNet adapter.)
1. Click here to expand the list
of communication adapters.
2. Double-click on the
1734-ADN DeviceNet
adapter. You can also click
and drag the adapter name
onto the network. The module appears
on the network.
IMPORTANT
The adapter must always exist on the DeviceNet
network at Node 00.