Rockwell Automation 1734-485ASC POINT I/O ASCII User Manual - Manual (Page 34)

Publication 1734-UM009B-EN-P - July 2003
2-8 Configuring Your ASCII Module
Checking I/O Status and
Viewing the EDS File You can view the I/O data setup, and the EDS file by clicking on the
appropriate tab.
Click on the I/O Defaults tab to display
the default characteristics for this
module.
This screen shows the input/output
defaults for the four modes.
These are:
Strobe
Polled
Change of state and
Cyclic
Click on View File to view
the actual EDS file (shown
at the left).
Click on the EDS File tab to
display the statistics of the EDS
file used to configure this
module.
You can view the actual
EDS file or edit the file.