Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 45)

Publication 1734-UM008B-EN-P - August 2005
Configure the Adapter 4-15
Notice that the 1756-CNBR Bridge is now on line, but the rest of the
I/O configuration (adapter and I/O modules) connections are not
scheduled (notice the yellow triangles).
Configure the
1734-ACNR Adapter You have now built the I/O tree in RSLogix5000, and the RSLogix5000
software used the chassis size from the 1734-ACNR General Tab. Now
you need to download this new chassis size value into the 1734-ACNR
adapter hardware. This procedure will synchronize the chassis size
value from the RSLogix5000 software into the 1734-ACNR adapter.
1. Highlight the 1734-ACNR adapter, and right-click to choose
Properties.
2. Click the Chassis Size tab.