Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 47)

Publication 1734-UM008B-EN-P - August 2005
Configure the Adapter 4-17
6. Click Apply to update the value in the chassis size module.
7. Click the Connection tab.
Notice that the connection request error is still present because
we haven’t scheduled any of the I/O module connections yet.
You’ll do that through RSNetWorx for ControlNet.
Schedule I/O
Module Connections Use these procedures to schedule I/O module connections.
1. Start RSNetWorx for ControlNet.
2. From the File menu, choose New.
3. Click OK.
4. Choose Network>Online.