Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 51)

Publication 1734-UM008B-EN-P - August 2005
Configure the Adapter 4-21
19. Notice that all of the yellow warning triangles are gone in the
I/O Configuration.
20. Notice that the Status in the 1734-ACNR Module Properties dialog is
Running with no faults.
Access Module Data via
the 1734-ACNR Adapter Use the following information to use the 1734 POINT I/O ControlNet
adapter module data in the ladder logic program.
• ACNR = the name you gave to your ControlNet adapter
• # = slot number of POINT I/O module
• C = configuration, I = input, O = output
When there is no slot number, that is the rack optimized data.
Here are some typical sample comfiguration data examples.
clear
of
faults