Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 54)

Publication 1734-UM008B-EN-P - August 2005
4-24 Configure the Adapter
• ACNR:3:I (1734-IE2V module) input data
• ACNR:I or ACNR:O (rack optimized inputs/outputs)
Use the controller tags in your ladder program to read input data or
write output data.
• For RSLogix5000 programming instructions, refer to RSLogix
5000 Configuration and Programming for the Logix5000 Family
of Controllers, publication no. RLD300GR.
• For ControlLogix controller information, refer to ControlLogix
System User Manual, publication 1756-UM001.
Slot Status Bits
The Slot Status bits display the connection status for each of the
POINT I/O modules that use a rack optimized connection.
• Bit 0 corresponds to the rack optimized connection in the
1734-ACNR slot 0.
• Each of the other bits (1-64) correspond to a POINT I/O module
that may be installed in the POINT I/O backplane.