AJA KUMO CP - Manual (Page 16)

KUMO v3.1 www.aja.com 16
Windows 7 PC
Configuration using
UPnP
If your Windows 7 PC supports UPnP protocols (most do) and UPnP service is enabled
(refer to your Microsoft Windows documentation), you can control KUMO routers by
simply selecting one from a device list:
1. Ensure KUMO to be controlled is powered up and connected via Ethernet (directly or
via LAN).
2. Use your Windows 7 Control Panel to go to Network and Internet.
3. Select View Network computers and devices.
Figure 8. Windows Network and Internet Screen
4. Look at the resulting device list under “Other Devices”—double click a KUMO’s name
to launch your Window 7 PC’s default browser.
Figure 9. Windows Network Screen
5. The browser will display the KUMO web user-interface, which you can use to control
and configure that KUMO device.
Other methods of KUMO network connection and configuration are described later in
this chapter.
KUMO Temporary
Static IP Address
KUMO devices also offer a factory default static IP address, allowing a direct and fail-safe
way to connect via a computer connected to KUMO either directly or via a LAN
connection. The computer you use will need to be set to a static IP address that is
Click This
Double-click the KUMO name to launch your default web browser