AJA KUMO CP - Manual (Page 40)

KUMO v3.1 www.aja.com 40
2. When you have selected a valid KUMO image file, click Open and then OK the upload
in the web browser. The file you select will upload to the KUMO and be tested for
validity. Incomplete, corrupted, or non-KUMO software files are rejected.
3. When the upload completes you will be asked if you want to commit the firmware to
flash.
4. Click Commit Uploaded Firmware. The firmware will be loaded to flash. Wait for this
to complete.
5. When done, click the Restart button to reset your KUMO and refresh the web browser
and KUMO UI.
Once these steps are complete, the KUMO will be running the software you just
uploaded until the next time you upgrade it. The configuration of the KUMO prior to the
upgrade is preserved.