AJA KUMO CP - Manual (Page 46)

KUMO v3.1 www.aja.com 46
The assigned router name appears below each button. You can change the selected
(currently-controlled) router on the panel by clicking the a button on the Home page.
The panel’s router select button will tally appropriately.
Configuration Page Using the Configuration page, you can:
• Adjust the Display Intensity slider – select one of four button illumination levels.
• Reset “Auto Configure” – resets the Auto Configure function to automatically set up
one control panel to one router. This function re-boots the panel to trigger the
configuration. Upon reboot, if any other router is found on the network, it will not pair
to the panel.
• Reset to Factory Defaults – resets all user settings to factory defaults.
Figure 45. KUMO CP Browser Configuration Page
Network Page The Network screen provides access to standard TCP-IP setup fields and allows you to
click on the System Name field to change it. The MAC address is a fixed machine address
composed of manufacturer identification and product serial numbers.
Click the Update Network Settings button to enter your settings.
Figure 46. KUMO CP Network Setup Screen
Identify Button Click on the Identify button to find the physical location of currently controlled panel.
KUMO CP Identify Button