Accessing kumo devices in firefox, Windows 7 browser: type in kumo static ip address – AJA KUMO CP User Manual
Page 26
KUMO v3.1
www.aja.com
26
Accessing KUMO
Devices in Firefox
1. Click on the DNSSD icon to open a drop-down list of all the KUMO devices accessible
on the network.
Figure 19. Firefox DNSSD list of KUMO Devices
2. Click on a KUMO device’s name to open its webpage.
3. Once connected to KUMO's web interface, reconfigure KUMO's network parameters
as desired.
Windows 7 Browser:
Type in KUMO Static
IP Address
KUMO offers a factory default static IP address. The default static IP address is temporary
and is intended only to allow an initial connection. Once you’ve connected using the
static IP, you can then enter a desired network configuration using KUMO's Network tab.
NOTE:
The default static address is temporary and will be disabled the next time KUMO restarts. Any
changes in the Network configuration will be saved upon restart.
1. Set the KUMO to its factory default IP address. See
“KUMO Temporary Static IP Address”
2. Configure your computer to 192.168.101.X as shown below (this example is for a PC
connected directly to KUMO):
IMPORTANT:
First record existing TCP-IP settings so that you can return your computer to normal
operation after this procedure.
A. Use Control Panel to access your Local Area Network properties. In Windows 7 the
path is:
• Control Panel > Network and Internet > Network and Sharing Center
B. Then, under “Connections” click on the Local Area Connection for the PC’s
Ethernet port.