AJA KUMO CP - Manual (Page 43)

KUMO v3.1 www.aja.com 43
Chapter 4: KUMO Remote Control Panel
The KUMO CP Control Panel is a destination-oriented panel allowing selection of up to 32
sources and destinations on each of up to four KUMO routers. The control panel will
connect to a single KUMO router automatically without computer/browser interface. For
connection to up to four routers at a time, use the KUMO browser interface to assign the
router select buttons to any four KUMO routers on your network.
Figure 39. Direct Connect KUMO Control
Figure 40. Networked KUMO Control
In this multi-router network configuration with Ethernet connection between control
panels and routers, the Router Delegation Buttons (shown below) are assigned to up to
four active routers using the control panel web interface (for details, see
“Home Page” on
page 45 ).
Connectors and
Indicator
KUMO CP provides inputs for two power supplies—one included, redundant supply
optional. An RJ-45 connector provides 10/100/1000 Ethernet connection to the internal
Linux OS/web server.