AJA KUMO CP - Manual (Page 36)

KUMO v3.1 www.aja.com 36
KUMO Home
From the Home screen, you can use the pulldown menu in the upper left to see all of the
KUMO routers present on the local LAN and select the one you want to control or
monitor.
Control Panel
Operation
Immediately below the KUMO selection menu are the Source (input) buttons. Below the
Source (input) buttons are the Destination (output) buttons. Click on any Destination and
it will highlight and cause it’s currently selected Source button to illuminate.
Figure 30. KUMO Web Browser Control Panel
NOTE: In Configuration, you can hide Destination buttons that are not wanted for control from your
location (see
“Hide” on page 38 ).
Router
Configuration
From the Configuration screen you can select the operating mode (Normal, Dual, Quad),
change the Source and Destination names and the colors of the buttons, and Lock and
Hide Destination buttons.
Figure 31. KUMO Web Interface, I/O Configuration Screen
Mode Selection Click on the Signal switching mode drop down list to select Normal, Dual, or Quad
operating mode. When Dual or Quad mode is selected, the number of Source and
Destination buttons will be reduced to match that configuration.