AJA KUMO CP - Manual (Page 48)

KUMO v3.1 www.aja.com 48
A
Appendix A: Specifications
KUMO SDI Router Specifications
Formats 3.0 Gbps, 1.5 Gbps, 270 Mbps, DVB-ASI, Auto Select
Video Inputs/Outputs
Standards
SDI (SMPTE 259/292/296 and 424) BNC
Cable Equalization
(BNC inputs, 1694 coax)
270 Mb – 400 meters
1.5 Gb – 200 meters
3 Gb – 140 meters
Input/Output Return Loss
(BNC)
>15dB to 270Mb, > 10db 1.5Gb to 3Gb
Reference Input • Analog input, passive looping BNCs
• Format: NTSC, PAL, Tri-level sync
Control • 10/100/1000 Ethernet, RJ-45, internal Linux OS/web server
• RS-422 Serial DB9 female
Environment • Operating Temperature: 0 to 40 Degrees C
• Relative Humidity: 0 to 90%, non-condensing
Power 100-240 VAC 50/60Hz, 9-17 VDC, 12 VDC nominal, optional redundant power supply
+12 VDC nominal, 9 – 18 VDC range, optional redundant power
KUMO 1604 – 7.5 Watts, 0.8A at 12VDC
KUMO 1616 – 20 Watts, 1.8A at 12VDC
KUMO 3232 – 26.4 Watts, 2.2A at 12VDC
Size Depth – 1 RU 1.5” (38.1 mm); 2 RU 1.543” (39.2 mm)
Height – 1 RU 1.72” (43.7 mm); 2 RU 3.47” (88.14 mm)
Width – 1 RU and 2 RU 19” (483 mm)
Weight KUMO 1604 – 1.2 lb. (.55 kg)
KUMO 1616 – 1.4 lb. (.64 kg)
KUMO 3232 – 4.58 lbs. (2.1 kg)
SDI Signal Switch Note KUMO routers switch SDI signals in a manner compliant with SMPTE RP168-2009.
Because KUMO routers (or any similar router) switch the SDI stream without de-
serializing, the switch point can cause a temporary anomaly in the SDI stream. This can
cause downstream equipment, depending on the characteristics of the SDI receiver(s), to
react to the switch (for example, a monitor "glitch or roll"). It is also possible that
switching anomalies can appear on just one or more outputs in the same group in the
Dual and Quad modes. This effect occurs regardless of the relative timing of the SDI
signals being switched, or any reference input connected to the router.