AJA KUMO CP - Manual (Page 49)

KUMO v3.1 www.aja.com 49
KUMO CP Specifications
Control • 10/100/1000 Ethernet, RJ-45, internal Linux OS/web server
Environment • Operating Termperature 0 to 40 Degrees C
• Relative Humidity: 0 to 90%, non-condensing
Power 100-240 VAC 50/60Hz , 9-17 VDC, 12 VDC nominal, optional redundant power supply
KUMO CP – 4 Watts, 0.4A at 12VDC
KUMO CP Size Depth – 1.07” (27.3 mm)
Height – 1.72” (43.7 mm)
Width – 19” (483 mm)
KUMO CP Weight 1.2 lb. (.55 kg)
GVG Native Protocol Support
Introduced with v2.0 firmware, KUMO provides basic support for the GVG Native
Protocol, aka Series 7000 Native Protocol. GVG Native Protocol, using:
• 1 serial connection via RS-422 with a 9-pin connector
• TCP/ethernet for up to 10 connections
For for information, refer to Grass Valley documentation at:
http://www.grassvalley.jp/pdf/RoutingProductsProtocolManual_2.pdf
NP Commands Supported : Background:
• BK, I; Connect, heartbeat
• BK, N; Gets system name
• BK, T; Gets Software Title
• BK, t; Gets Protocol Software
• BK, R; Gets software Version
• BK, d; Gets device name.
Queries:
• QN, S; Gets all srcs by name
• QN, IS; Gets All srcs, name & index
• QN, D; Gets All dests, names
• QN, ID; Gets All dests, name & indx
• QN, L; Gets levels (hard coded as "Kumo_Lev0")
• QD, {destname}; Gets: protect {On/Off}, chop{=OFF}, {sourceName}, level{= lev0}
• Qd, {destname}; Gets: protect {On/Off}, chop{=OFF}, {sourceName}, level{= lev0}
Control:
• TD,{destname,srcname};Takes by name
• TI,{destIndx,srcIndx}; Takes by index
• PR,{destname, levelmask} Sets lock for given dest.
• UP,{destname, levelmask} Unsets lock for given dest.