Drivers – ClearCube R-Series Data Center Products User Manual
Page 103
R-Series Data Center Products User’s Guide
Hardware Upgrade and Replacement Procedures • 79
Drivers
You can obtain drivers for ClearCube blades from the ClearCube Support site at the
following URL:
To obtain drivers:
1. From the Support site, select the product for which you need drives from the
drop-down lists near the middle of the page.
2. From the product page, click Drivers, located below the product description.
3. Under the drivers heading, click the link for the drivers you require. Depending
on your browser, you should receive a message indicating that the download has
started. Click OK and specify a location to save the file.
4. Navigate to the location the driver archive file is saved. The archive should
include a readme file that provides information about extracting and installing the
drivers.
CAUTION: All upgrades should be performed by a qualified computer
technician. Take proper precautions to avoid damaging electrostatic
discharges by working at a grounded computer equipment repair
bench. Damage caused by improper upgrade procedures will void
your warranty.
Disconnect all sources of power before servicing the R4300 chassis.