ClearCube R-Series Data Center Products - Manual (Page 47)

R-Series Data Center Products User’s Guide Chassis and Blade Installation • 23
To install a chassis using the CRM kit, do the following:
Figure 16 Rack Bracket for CRM Kit
1. Unscrew the thumbscrew holding each pair of chassis and rack brackets together,
and slide the brackets apart.
2. Mount the chassis bracket to the chassis with 4 flathead screws. Repeat on the
other side.
3. Determine the location and holes to be used to mount the rack ears on the rack
bracket. A guide is provided in the CRM packaging. Insert rack ears on
spring-loaded slider to the back side of the back rack post.
Figure 17 Rack Bracket Attachment Points
NOTE
The chassis and rack brackets are interchangeable
side-for-side.
Front Rack Ears Locking Latch
Main Bracket Finger Handle
Spring Slider
Flanges
Slider (Back)
Rack Ears
Back of Rack Bracket Front of Rack Bracket