ClearCube R-Series Data Center Products - Manual (Page 70)

46 • Chassis and Blade Installation R-Series Data Center Products User’s Guide
2. Unzip the update package and read the enclosed Technical Bulletin (a PDF file) to
learn any special considerations for the package.
3. Copy the package to a directory visible to the Sentral Console.
4. From the Functional menu, select Management > Chassis.
5. In the Tasks menu, click Update Firmware.
6. Select the primary RMM from the Primary Execution Pane.
7. In the Tasks menu, click on Select for Update.
8. In the Serial Number column, select the serial number of the chassis containing
the RMM to be updated.
9. Click Browse and choose the firmware update file.
10. Press Update Now. The Primary RMM and the other modules in this chassis are
updated.
After the Primary RMM has been updated, do the following to update the other
RMMs in the Chassis Group:
1. From the Functional menu, select Management > Chassis.
2. In the Tasks menu, click Update Firmware.
3. In the Tasks menu, click on Update Group.
4. Select the Chassis Group that contains the RMM you just updated, and click
Select for Update.
5. Select Browse and browse for the update file.
6. Press Update Now. The other RMMs and modules in this Chassis Group are
updated.
After updating each Chassis Group, re-discover the Chassis Group. For more
information, see the Sentral Administrator’s Guide.
Remote Management Card Configuration
Control Chain Auto-Negotiation
Two types of Remote Management Cards may be present in your network:
• Remote Management Module (RMM) in R4300 chassis
• Remote Management Card (RMC) in R4200 chassis
The RMC in Blade Switching (BSBP) and Direct Connect (DCBP) BackPacks is not
capable of auto-negotiation. A BCBP or DCBP with an RMC installed is always the
Primary in the Control Chain. RMCs can be installed only in BCBPs and DCBPs.