ClearCube R-Series Data Center Products - Manual (Page 89)

R-Series Data Center Products User’s Guide Chassis and Blade Installation • 65
Figure 33 Model R1350 MSL and CMOS Jumper Locations and Settings
Clearing All R3080D and 3040S CMOS Settings
The R3080D and R3040S motherboards provide a jumper you can use to clear all
current CMOS settings. By default, the jumper is on pins 1 and 2 for normal operation.
The following figures show the location of the JP3 header and default jumper position
on the R3080D and on the R3040S.
Figure 34 Model R3080D CMOS Header and Jumper Settings
Figure 35 Model R3040S CMOS Header and Jumper Settings (Default Setting Shown)
JP6 JP1
USB Mass Storage
1
3
MSL Jumper
1
3
devices function
normally (default)
USB Mass Storage
devices do not
function
Reset CMOS
1
3
password on
1
3
Normal operation
CMOS Jumper
(default)
restart
Clear CMOS
Moving Jumper to This
Position Clears
CMOS Settings
Disable Clear CMOS
CMOS Settings are
Maintained
(Default Position)
MSL
R520
CMOS
JP10
JP6
1
Detail of the JP10
Clear CMOS Header
(on Bottom)
R3080D Blade
CPU
1
CPU
0
Battery
JP3
1
2
3
Disable
Enable
Base of R3040S Blade and Motherboard
Detail of the JP3
Clear CMOS Header