ClearCube R-Series Data Center Products - Manual (Page 27)

R-Series Data Center Products User’s Guide ClearCube Architecture and Product Overview • 3
A display area at the front of each blade provides active status indicators. The four
LEDs on the front panel of the blade are described in Table 1 on this page and shown
in Figure 2 on page 4.
The following figure shows the blade font panel as it appears on the blade, and also as
it appears inside a chassis with the chassis door closed. Labels on the chassis door
identify the front panel LEDs, buttons, and port.
Table 1 Blade LED Functions
LED Color Description
Power
Green Blade is powered on.
Off Blade is powered off.
C/Port
Green C/Port is connected, and link is good.
Red C/Port is not connected, or link is bad.
NOTE: The C/Port LED does not provide any information about PCoIP link
status. If you are using a PCoIP client, see the LED on the PCoIP client
for link status information.
If you are connecting to a blade using a PCoIP zero client and a C/Port
is not connected to the blade, the C/Port LED is not applicable and is
always red.
Disk
Green Flashing indicates hard disk activity.
Off No hard disk activity.
E-Net
Green
Model R3040S: 10/100/1000 Mb/s link — flashing indicates activity.
Model R3080D: 10/100/1000 Mb/s link — flashing indicates activity.
Model R1350:
1000 Mb/s link — flashing indicates activity.
Yellow/
Amber
Model R3040S: Not applicable.
Model R3080D: Not applicable.
Model R1350: 10/100 Mb/s link — flashing indicates activity.
Off No link.