ClearCube R-Series Data Center Products - Manual (Page 12)

xii • Introduction R-Series Data Center Products User’s Guide
Below are the graphical symbols that are used on ClearCube Technology, Inc.
Products and their meaning.
These same symbols are used within this document where appropriate to indicate
situations that merit checking this or another manual, or situations that could result in
damage to equipment or physical injury.
Refer to Manual
Used on the equipment’s rating label to direct the operator or service
person to the manual for additional information.
Shock Hazard
This symbol indicates the presence of electric shock hazards. Enclosures
marked with these symbols should only be opened by qualified service
personnel. Refer to the manual for additional information.
Power
Identifies the soft-start switch located on front of the blade, used to power
the blade on and off.
Fuse
Located on equipment rating label. Symbol is accompanied with the
specifications needed for replacement. Only qualified technicians should
perform this operation.
Protective Earth Terminal
This symbol identifies the location of the protective earth terminal on the
equipment. This terminal is used to connect the protective earth conductor
of the power cord to the building's electrical distribution system's ground.
Ground Bond Terminal
This symbol identifies the location ground bond terminal. This terminal is
used to connect the ground bonding conductor, or the combination of
conductive parts to earth ground for safety purposes.
Equipment Protection Class II
May be located on the power adapter’s rating label. Indicates that
equipment is double insulated from hazardous voltages. Not to be
confused with “Class 2” that is a US National Electrical Code (NEC) circuit
classification.
CAUTION: A Caution notice in this manual indicates that equipment
damage or minor injury may result if proper procedures are not followed.