Symboles - français, Symboles – français – ClearCube R-Series Data Center Products User Manual
Page 14
xiv • Introduction
R-Series Data Center Products User’s Guide
•
Live Circuits – Operating personnel and service personnel must not remove
protective covers when operating the ClearCube chassis. Adjustments and service
to internal components must be undertaken by qualified service technicians.
During any service of this product other than replacing a PC blade or externally
accessible modules on the chassis, the main connector to the premise wiring must
be disconnected. Dangerous voltages may be present under certain conditions.
Use extreme caution.
•
Explosive Atmosphere – Do not operate the chassis in conditions where
flammable gases are present. Under such conditions this equipment is unsafe and
may ignite the gases or gas fumes.
•
Part Replacement – Only service equipment with parts that are exact
replacements, both electrically and mechanically. Contact ClearCube Technology
for replacement part information. Installation of parts that are not direct
replacements will void the warranty and may cause harm to personnel operating
the chassis. Furthermore, damage or fire may occur if replacement parts are
unsuitable.
•
Modification – Do not modify any part of the C/Port, chassis, or PC blade from
its original condition. Modifications may result in hazards.
•
Laser Safety – The Fiber Transceiver and the Fiber C/Port have been evaluated
and certified to an EN 60825-1 – Safety of laser products. Refer to Appendix B
for more details.
ClearCube Technology products that use lasers display the following graphic on the
rating label:
Marked devices comply with the FDA code of Federal 21 CFR 1040 per Notice 50
and/or the Canadian Radiation Emitting Devices Act REDR C1370.
Symboles – Français
Les symboles sur l'appareil indiquent des informations spécifiques à l'intention de
l'utilisateur ou d'un technicien de maintenance. Il est important de bien comprendre la
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.