ClearCube R-Series Data Center Products - Manual (Page 46)

22 • Chassis and Blade Installation R-Series Data Center Products User’s Guide
Figure 15 Side View of Chassis Centered in a Two-Post Rack
6. Attach the AC power cord(s) packaged and supplied with the chassis and route it
to the back panel power connector(s) and then to a surge-protected power source
such as an uninterruptible power supply (UPS) or power strip. Use the cable
retention clamp on the chassis to avoid inadvertently disconnecting the power
If your ClearCube system installation is part of a larger office renovation or
deployment, complete the chassis hardware installation and wiring, but delay
installation of the PC blade computers until the rest of the area has been finished and
cleaned.
If installing R4300 chassis assemblies, the R4300 modules can be installed now, but
installation should be delayed until construction cleanup is completed. Modules are
required to complete cabling, but preliminary cabling for C/Ports and clients can be
completed without the modules being installed.
Chassis Rapid Mount Kit
The Chassis Rapid Mount (CRM) kit allows installing chassis in a cabinet enclosure
or other rack that provides both front and back posts.