ClearCube R-Series Data Center Products - Manual (Page 86)

62 • Chassis and Blade Installation R-Series Data Center Products User’s Guide
When connecting to an R3040S, use the even-numbered USB ports on the back apron
of the R4300. The odd-numbered USB ports on the chassis are not connected to the
R3040S. This is the same scheme as with connecting C/Ports to a dual-slot blade.
See “Mass Storage Lockout: Disabling Access to USB Mass Storage Devices” on
page 71 for information about enabling and disabling USB ports on user ports (zero
clients, thin clients, and so on).
R1350 Monitor Support
The following table lists each R1350 video option and the number of supported
monitors for each option.
R3080D and R3040S Display Support and Configuration
This section details maximum supported displays for each R3080D and R3040S
graphics option (card), and describes how to configure display types when using
V52x0 PCoIP Host cards.
Graphics Options and Number of Displays Supported
The following table lists each video option and the number of supported displays for
each option.
Configuring Multiple DVI-I Displays with V52x0 PCoIP Host Cards
If your R3080D or R3040S blade contains a V52x0 PCoIP Host card, the blade
supports one DVI-I monitor and one VGA monitor by default. You can use the
included S3 Graphics
®
ScreenToys utility to change video settings so you can connect
Graphics Option
Single
Monitor
Dual
Monitor
Quad
Monitor
Intel® GMA 950 integrated graphics engine X
NVIDIA® Quadro®4 PCI-Express® card (MGA6) X X
(with ClearCube MVX)
X
(with ClearCube MVX)
V5120 Dual Host card X X
V5140 Quad Host card X X X
Graphics Option
Single
Monitor
Dual
Monitor
Quad
Monitor
NVIDIA® Quadro®4 PCI-Express® card (MGA6) X X
(with ClearCube MVX)
X
(with ClearCube MVX)
V5220 Dual Host card X X
V5240 Quad Host card
X
(R3040S only)
X
(R3040S only)
X
(R3040S only)