Figure 12, Eluent bottle – connected – Metrohm 881 Compact IC pro – Cation User Manual
Page 33
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
881 Compact IC pro – Cation
■■■■■■■■
25
■
Fasten the completely equipped bottle attachment (12-10) on the
eluent bottle. The aspiration filter (12-6) must rest on the base of
the eluent bottle.
■
Close the remaining small opening on the bottle attachment with
a threaded stopper from the accessories set.
6 Mounting the adsorber tube
Note
In the case of alkaline eluents and eluents with lower buffer
capacity, the eluent bottle must be equipped with a CO
2
adsorber
■
First, place a piece of cotton (12-3), then the CO
2
adsorber (12-4)
in the large opening of the adsorber tube (12-2) and close with
the plastic cover.
■
Fasten the adsorber tube (12-2) using the SGJ clip (12-12) onto
the bottle attachment (12-11).
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Figure 12
Eluent bottle – connected
1
Eluent aspiration tubing 6.1834.080
For aspirating the eluent. Pre-installed.
2
Adsorber tube 6.1609.000