7 injection valve, Injection valve, Figure 8 – Metrohm 858 Professional Sample Processor User Manual
Page 23: Figure 9, Fill / inject
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Overview of the instrument
858 Professional Sample Processor
■■■■■■■■
15
2.7
Injection valve
The injection valve (for the model version 2.858.0030) can be used with
its connectors 1 to 6 (see figure) for complex sample preparation steps.
Figure 8
Injection valve
The connections of the connectors in the switching positions FILL and
INJECT can be found in the schematics shown below.
Figure 9
Fill / Inject
The injection valve must be covered with the red protective cap to protect
it against dust contamination when not in use.
Advertising