Metrohm 858 Professional Sample Processor - Manual (Page 26)

3.5 Mounting a filtration cell holder or Dosino holder ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭ 858 Professional Sample Processor
Figure 12 Mounting the retaining plate
1 Mount the retaining plate
Fix the plate to the front of the tower with the four hexagon screws
provided. The hexagon key required is part of the accessories.
3.5 Mounting a filtration cell holder or Dosino holder
Figure 13 Mounting filtration cell holder or Dosino holder
The filtration cell holder (6.2057.030) or the Dosino holder (6.2057.040)
can be mounted on the side wall of the tower, see above.
First remove the second and third screws from the bottom on the side
wall. Then fix the filtration cell holder or Dosino holder in place with the
two screws supplied.
Mounting the Dosino
If a Dosino is required, then it can be installed in the 6.2057.040 Dosino
holder.