Figure 18, Mounting the stand plate – Metrohm 858 Professional Sample Processor User Manual
Page 29
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
858 Professional Sample Processor
■■■■■■■■
21
2 Fasten the stand plate
■
Hook the fixing clamps on the stirrer rail.
■
Tighten the hexagon screws of the fixing clamps.
Figure 18
Mounting the stand plate
3 Mount the stirrer and dilution vessel
■
Hang the magnetic stirrer (801 Stirrer) on the support rod and
align it.
■
Fix the orientation of the stirrer using the red knurled screw on
the rear.
■
Fasten the 6.2013.010 clamping ring, see the following figure.
■
Fasten dilution vessel lid to the support rod.
Advertising