Metrohm 858 Professional Sample Processor - Manual (Page 30)

3.6 Mounting the stand plate ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭ 858 Professional Sample Processor
Figure 19 Mounting the stirrer and the dilution vessel
4 Mount the cross strut
￭ Assemble the cross strut according to the drawing shown below.
￭ Fasten the cross strut provisionally to the support rod.
Figure 20 Mounting the cross strut
5 Fix the support rod
￭ Screw the cross strut to the rear of the tower with the hexagon
screw provided as shown below.
￭ Tighten all hexagon screws.