Metrohm 858 Professional Sample Processor - Manual (Page 35)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
858 Professional Sample Processor ￭￭￭￭￭￭￭￭ 27
3.9 Mounting the safety shield
For safety reasons, it is imperative that you mount the accompanying
safety shield (splash protection 6.2751.110). A serious risk of injury exists
if anyone reaches into the working area of the instrument.
Caution
The 858 Professional Sample Processor may not be operated without a
safety shield.
Use the accompanying hexagon screws and the hexagon key to mount
the safety shield according to the following figure.
Figure 24 Mounting the safety shield
If a different robotic arm is used, then a different, suitable safety shield
can be ordered from Metrohm.