6 mounting the stand plate, Mounting the stand plate, Figure 16 – Metrohm 858 Professional Sample Processor User Manual
Page 28: 2001.070 stand plate, Figure 17, Mounting the support rod
Advertising
3.6 Mounting the stand plate
■■■■■■■■■■■■■■■■■■■■■■
20
■■■■■■■■
858 Professional Sample Processor
3.6
Mounting the stand plate
An external dilution or measuring cell can be mounted to the 858 Profes-
sional Sample Processor with the aid of a 6.2001.070 stand plate.
Figure 16
6.2001.070 stand plate
Mount the stand plate as follows:
1 Mount the support rod
■
Plug together the cutting ring and the hexagon screw with the
base plate (see below) and place on a flat support surface.
■
Place the support rod on the screw and screw tightly.
■
Tighten the hexagon screw with a hexagon key of the proper size.
Figure 17
Mounting the support rod
Advertising