7 guide chain for cables and tubing, Guide chain for cables and tubing, Figure 21 – Metrohm 858 Professional Sample Processor User Manual
Page 31: Fixing the support rod
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
858 Professional Sample Processor
■■■■■■■■
23
Figure 21
Fixing the support rod
The accessories for the dilution vessel and the necessary tubings and
capillaries can then be attached. You will find information about the
corresponding accessories set in the documentation.
3.7
Guide chain for cables and tubing
Tubing, capillaries and cables can be placed in the guide chain.
You can open the individual chain links with a screwdriver as follows.
1 Open the guide chain
■
Insert a screwdriver into the groove located on the side of a chain
link.
■
Loosen the clip with a forceful leverage movement.
■
Pull the clip out of the chain by hand.
■
Repeat the above actions for each chain link.
Advertising