Sindoh M611 - Manual (Page 134)

Scanner, Printer and Fax
3-
50
2 Press 【 】 button.
3 Scan the original and save it on the memory.
Delay Tx
You can send the document at the designated time without sending it instantly. When it becomes
the designated time, the document saved on the memory is automatically sent.
1 Place the original. Before switching to the fax mode, press 【Menu】 to set resolution and density.
① Press 【Fax】 button at the left on the LCD to go to the fax mode, and then press 【◀】or【 ▶】 button until [Tx
Mode] appears. Press 【OK】 button.
② Press 【▲】 or 【▼】button until [Delay Tx] appears.
③ Press 【OK】 button to turn on the function.
2 Using the number pad, speed dial or address book, enter the number, and then press 【OK】
button. Enter the number in the same way as Broadcast Tx.
3 Press 【▲】 or 【▼】button to go to the field and use the number pad to enter the time.
The time format is [HH: MM]. If the time is behind the current time, the document is faxed on this day. If
the time is ahead of the current time, the document is faxed on the next day.
Caution
- You can designate the time with 24 hour system.
4 Press 【 】 button.
5 Scan the original and save it on the memory to terminate the operation. When it becomes the designated
time, the fax is sent