Sindoh M611 - Manual (Page 70)

Copying
2-
2
1. How to Copy
Basic Operation
1 Place the original on Exposure Glass or ADF. For more information, refer to P. 1-25 「Placing the Original」.
2 Press 【Copy】 button to go into the setting mode.
3 Select necessary settings.
You can specify settings for the original size, paper source (paper size), type of original, copy density,
auto density, scale, N-up, collate, duplex settings and copy quality. For more information, refer to
P. 2-6 ~ P. 2-15.
4 To make multiple copies of the scanned original, press 【Copy】 button and then specify no. of copies using
ten key.
5 Press 【 】 button to start copying.
Note
- Press 【 】 button to cancel copying.
- Press 【 】 button for more than two seconds to reset the values to the default settings.