Scan settings, Setting, Scan settings -10 – Sindoh M611 User Manual
Page 148: Setting -10
Settings and Changes of Each Function
4-
10
4. Scan Settings
You can select the default scan setting when you do the scan job with the USB memory.
The default setting is the setting that you don’t change by pressing 【Scan】button.
When you do the scan job with the PC, settings are subject to the scan driver.
Setting
1
Press 【 Menu】 button, and then press 【OK】 after selecting [Settings].
2
Press 【▲】 or 【▼】 button until [Scan Settings] appears, and then press 【OK】 button.
3
Press 【▲】 or 【▼】 button to go to the wanted item, and then press 【OK】 button.
Each menu item has a list of various values which consist of descriptive words, number or On/Off.
4
When you make wanted settings, press 【 】 button to go to [Ready] mode.
The copy settings made are used until you have new settings, or when you reset to the default copy set-
ting. You can set the settings to your needs