Duplex scan, Fax density, Duplex scan -33 – Sindoh M611 User Manual
Page 171: Tti -33, Fax density -33
4-
33
Settings and Changes of Each Function
4
Duplex Scan
When scanning through ADF with duplex scan on, the images on both sides of the document are all scanned.
1
Go to [Menu] [Settings] [Fax Settings] [Fax Tx Settings] [Duplex Scan] to set the duplex printing.
2
Press 【▲】 or 【▼】 to select whether to duplex on or off.
3
Press 【OK】 to apply the selected duplex setting.
TTI
1
Go to [Menu] [Settings] [Fax Settings] [General]> [TTI].
2
Press 【▲】 or 【▼】 to set TTI. (Default: On)
3
Press 【OK】 to apply TTI.
Fax Density
1
Go to [Menu] [Settings] [Fax Settings] [Fax Tx Settings] [Fax Density] to decide darkness of the
images to send.
2
Press 【▲】 or 【▼】 or number key pad to select the wanted darkness.
3
Press 【OK】 to apply the selected density.
-
Select one for the document from the 9 levels of the density.
Darkness
Value
Lighter
+4
Lighter
+3
Lighter
+2
Lighter
+1
Normal
Darker
+1
Darker
+2
Darker
+3
Darker
+4
Darkness
Level
Lighter ← Normal → Darker