Sindoh M611 - Manual (Page 46)

Preparation for Using the Machine
1-
18
2 Hold both width guide tab and width guide, and then push them to the right.
3 Hold both length guide tab and length guide, and then extend them to the maximum position.
4 Fix the length guide wall to meet the selected paper size. The position to fix is indicated at the bottom
side of the tray.
5 Loosen and flex the paper and then blow air to the paper.
Do not fold or wrinkle paper.
Make the edges of paper flat and arrayed.
Important
- Do not load paper in the tray over the maximum height indicated in the tray unit.
Overloading the paper may cause paper jams.
- Do not mix different media types in the same tray.
6 Load paper with the print side faced down, and push the paper forward.