Ohp copy, Collated copy, Duplex – Sindoh M611 User Manual
Page 82: Making a 2-sided copy, Ohp copy -14, Collated copy -14, Duplex -14, Making a 2-sided copy -14
Copying
2-
14
OHP Copy
In case of scanning or printing on OHP film there remains roller marks or shade images. To prevent the roller
marks or shade images, place a book and white LETTER paper over the OHP to make copies.
Collated Copy
Make sets of copies in the page order.
Duplex
Two pages of the original documents can be printed on both sides of paper.
Making A 2-sided Copy
1
Press 【Copy】 button to go to the copy setting mode.
2
Press 【◀】 or 【▶】 button until [Duplex] appears, and then press 【OK】 button.
3
Press 【▲】or 【▼】 button to select [Simplex Scan -> Single Print], [Simplex Scan -> Duplex Scan], or [Du-
plex Scan -> Duplex Print] and then press 【OK】 button.
4
When using the flatbed scanner, if Duplex output is selected, “Scan Next Page” appears after scanning
the documents. Then, place the other side of the original on the flatbed and press 【 】button. The original
is scanned again and automatically printed on the other side. The first scanned page is copied on the front
side of paper.
5
If ADF is used, the odd numbered page is copied onto the front side, and even numbered page onto the
rear side.