Cfgremove – Dell POWEREDGE M1000E User Manual
Page 126
94
Fabric OS Command Reference
53-1001764-02
cfgRemove
2
cfgRemove
Removes a member from a zone configuration.
Synopsis
cfgremove “cfgName”, “member[; member...]”
Description
Use this command to remove one or more members from an existing zone configuration. If all
members are removed, the zone configuration is deleted.
This command changes the Defined Configuration (see cfgShow). For the change to become
effective, enable the configuration with the cfgEnable command. For the change to be preserved
across switch reboots, save the configuration to nonvolatile memory with the cfgSave command.
Notes
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operands are required:
“cfgName”
Specify a name for the zone configuration, enclosed in double quotation
marks.
“member”
Specify a zone member or a list of zone members to be removed from the
configuration. The list must be enclosed in double quotation marks. Members
must be separated by semicolons.
Examples
To remove a zone from a configuration:
switch:admin>
cfgremove "Test_cfg", "bluezone"
See Also
cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgSave, cfgShow, cfgTransAbort,
cfgTransShow