Enclosureshow – Dell POWEREDGE M1000E User Manual

Page 251

Advertising

Fabric OS Command Reference

219

53-1001764-02

enclosureShow

Displays attributes of the switch enclosure.

Synopsis

enclosureshow attribute

Description

Use this command to display attributes of the switch enclosure, including the vendor-specific
enclosure identifier and the identifier of the enclosure interface to which the switch is attached.

This command applies to products that are embedded in a blade server or storage chassis. Most
options are platform-specific. Options that do not apply to a platform are identified with a “Not
supported on this platform” message.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operand:

attribute

Specifies the enclosure attribute. Valid attributes include the following:

The vendor-specific enclosure identifier.

modelname

The vendor-specific enclosure model name.

slotid

The identifier of the enclosure interface to which the switch is attached.

rackname

The name assigned by the enclosure manager to the rack.

rackid

The serial number assigned by the enclosure manager to the rack.

enclosurename

The name assigned by the enclosure manager to the enclosure.

enclosureid

The serial number assigned by the enclosure manager to the enclosure.

connname

The product name used by the enclosure manager for the switch model.

connaddr

The connector address used by the enclosure manager for this switch
(indicates the physical position of the switch in the enclosure).

connid

The serial number of the switch used by the enclosure manager (not to be
confused with the Factory Serial Number).

conntype

The connector type used by the enclosure manager for this model of switch.

connloc

The switch location within the enclosure.

connpres

Information about the switch’s presence that is used by the enclosure
manager.

connfuse

Information about whether or not the switch has a fuse.

Examples

To display the identifier of the enclosure interface to which the switch is attached:

switch:admin>

enclosureShow slotid

Bay 4