Syslogdfacility – Dell POWEREDGE M1000E User Manual

Page 978

Advertising

946

Fabric OS Command Reference

53-1001764-02

syslogdFacility

Sets or displays the syslog facility.

Synopsis

syslogdFacility [-l level]

Description

Use this command to set the syslog facility to a specified log file, or use this command without
operands to display the current syslog facility. The syslog daemon (syslogd) reads and forwards
system messages to the log file specified by this command. You must configure the servers to
receive system messages by adding them with the syslogdIpAdd command.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operands:

-l level

Specifies the syslog facility. Valid levels are 0 through 7. The default is 7. This
operand is optional; if omitted, the current facility is displayed.

0 - LOG_LOCAL0

1 - LOG_LOCAL1

2 - LOG_LOCAL2

3 - LOG_LOCAL3

4 - LOG_LOCAL4

5 - LOG_LOCAL5

6 - LOG_LOCAL6

7 - LOG_LOCAL7 (default)

Examples

To set the syslog facility to LOG_LOCAL1:

switch:admin>

syslogdfacility -l 1

Syslog facility changed to LOG_LOCAL1

To display the current setting:

switch:admin>

syslogdfacility

LOG_LOCAL1