Alidelete – Dell POWEREDGE M1000E User Manual
Page 77
Fabric OS Command Reference
45
53-1001764-02
aliDelete
2
aliDelete
Deletes a zone alias.
Synopsis
alidelete “aliName”
Description
Use this command to delete a zone alias.
This command changes the defined configuration. For the change to become effective, enable the
zone configuration with the cfgEnable command. For the change to be preserved across switch
reboots, save the zone configuration to nonvolatile memory with the cfgSave command.
Notes
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operand is required:
“aliName”
Specify the name of the zone alias to be deleted. This operand must be
enclosed in quotation marks.
Examples
To delete the zone alias “array2”:
switch:admin>
alidelete "array2"
See Also
aliAdd, aliCreate, aliRemove, aliShow