Iodset – Dell POWEREDGE M1000E User Manual

Page 450

Advertising

418

Fabric OS Command Reference

53-1001764-02

iodSet

Enables in-order delivery (IOD).

Synopsis

iodset

iodset --help

Description

Use this command to enforce in-order delivery of frames during a fabric topology change.

In a stable fabric, frames are always delivered in order, even when the traffic between switches is
shared among multiple paths. However, when topology changes occur in the fabric (for instance, a
link goes down), traffic is rerouted around the failure and some frames might be delivered out of
order. This command ensures that frames are not delivered out-of-order, even during fabric
topology changes. It enforces a sufficient delay between the event that causes an existing path to
be removed and the establishment of a new path, so that frames are delivered in order. However,
this also means that frames are dropped during the delay, causing I/O failures.

When used without operands, iodSet enables in-order-delivery of frames on a switch (legacy IOD
behavior). Frame loss is unavoidable when a port goes down.

IOD is disabled by default. Use iodShow to display current settings. Use iodReSet to restore the
default setting.

Notes

You can no longer use this command to manage lossless DLS. Use dlsSet instead. The following
command options are deprecated in Fabric OS v6.4.0 and later:

•

iodset --enable -lossLessDls

•

iodset --disable -lossLessDls

•

iodset --show

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operands:

help

Displays the command usage.

Examples

To display the default legacy IOD setting:

switch:admin>

iodshow

IOD is not set

To enable IOD:

switch:admin>

iodset

IOD is set