Dell POWEREDGE M1000E - Manual (Page 947)

Fabric OS Command Reference 915
53-1001764-02
supportShowCfgDisable
2
supportShowCfgDisable
Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog |
systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi | ficon | ag | dce_hsl | crypto |
fcip
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 and 7500/7500E/FR4-18i
platforms and cannot be configured to collect data on unsupported platforms.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
os Disables the OS group commands.
exception Disables the exception group commands.
port Disables the port group commands.
fabric Disables the fabric group commands.
services Disables the service group commands.
security Disables the security group commands.
network Disables the network group commands.
portlog Disables the portlog group commands.
system Disables the system group commands.
extend Disables the extend group commands.
filter Disables the filter group commands.
perfmon Disables the Performance Monitor group commands
ficon Disables the FICON group commands.
iswitch Disables the FC Router group commands.
asic_db Disables the ASIC DB group commands.
iscsi Disables the iSCSI group commands.
ag Disables the Access Gateway group commands.
dce_hsl Disables the DCE group commands.
crypto Disables the encryption group commands
fcip Disables the FCIP group commands. Supported only on the Brocade
7800/FX8-24 and 500/7500E/FR4-18i.