Dell POWEREDGE M1000E - Manual (Page 141)

Fabric OS Command Reference 109
53-1001764-02
chassisName
2
chassisName
Displays or sets the chassis name.
Synopsis chassisname [name]
Description Use this command to display or change the name associated with the chassis.
Enter this command without parameters to display the current chassis name. Use this command
with the name operand to assign a new chassis name.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
name Specify a new name for the chassis, optionally in double quotation marks. A
chassis name can include up to 31 characters on the Brocade 300, 5100,
5300, and 5410 platforms. On all other platforms, the chassis name is
limited to 15 characters. A chassis name must begin with a letter, and can
consist of letters, numbers, underscore or hyphen characters. Spaces are not
permitted.
This operand is optional; if omitted, the current chassis name displays.
Examples To change the chassis name to “dilbert”:
switch:admin>
chassisname dilbert
switch:admin>
chassisname
dilbert
See Also switchName